JVC HR-J468EU Instructions Manual page 52

Auto Set Up
The Auto Set Up function sets the tuner channels, clock, Guide Program numbers and video channel*
automatically.
BEFO RE YO U START PLEASE M AKE SU RE TH AT:
The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
The video recorder's mains power cord is connected to a mains outlet.
The video recorder is turned off.
Load batteries into the remote control.
1 Press (recorder/remote)
2 Press %fi (remote) to select the international telephone
country code.
(Ex.) DEUTSCHLAND is selected.
● If you have selected a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step
● If you have selected 36 (MAGYARORSZAG), 42 (CESKA REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN
EUROPE), press O K . Clock Set screen will appear. Set the clock manually (
● If you have selected 32 (BELGIUM) or 41 (SUISSE), press
pressing %fi (remote), then go to step 3 .
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
3
Press O K twice (remote). Do NOT press any button on the video recorder or remote control until the display
panel shows as follows.
● If you have connected the video recorder to your TV via RF connection, press
To view picture signals from the video recorder, set your TV to the Video Channel.
● If you have connected the video recorder to your TV via AV connection, press
shows "1OUT – – " to set the Video Channel to off, then press OK to finish the Auto Set Up.
To view picture signals from the video recorder, set your TV to its AV mode.
* Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the recorder will
not perform Auto Set Up again. Perform tuner setting (
nel setting (
FOR MORE INFORMATION
SEE INSTRUCTIONS/ P4
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
Downloaded from: https://www.usersmanualguide.com/
– referring to the displa y pa nel
.
Language Code
pg. 44) as required.
VICTOR COMPANY OF JAPAN, LIMITED
* Useful for RF connection users.
International Telephone Country Code
BELGIUM : 32 NORGE
ESKÁ REPUBLIKA : 42 ÖSTERREICH
DANMARK : 45 POLSKA
DEUTSCHLAND : 49 PORTUGAL
ESPAÑA : 34 SUISSE
GREECE : 30 SUOMI
ITALIA : 39 SVERIGE
MAGYARORSZÁG : 36 OTHER WESTERN EUROPE : - -
NEDERLAND : 31 OTHER EASTERN EUROPE : EE
pg.42 – 43), then go to step 3 .
O K (remote) and select the language code by
Language Code
ENGLISH : 01
DEUTSCH : 02
FRANCAIS : 03
ITALIANO : 04
CASTELLANO : 05
NEDERLANDS : 06
SVENSKA : 07
Video Channel
● If "– –:– –" appears on the
display panel, see page 7
of the instructions.
OK to finish the Auto Set Up.
TV PROG – until the display panel
pg. 36), clock setting (
EN
: 47
: 43
: 48
: 351
: 41
: 358
: 46
3 .
NORSK : 08
SUOMI : 09
DANSK : 10
POLSKI : 11
E TINA : 12
MAGYAR : 13
pg. 42) and/or Video Chan-
Printed in Malaysia
EU
0199IYV ID PJ
* *