10.TEMPERATURE INDICATION
The temperature set on the remote controller may differ
from the temperature at the installation place,
distribution of the room temperature and sun-light
approaching condition, etc..
11.WIRING CONNECTION BETWEEN
INDOOR UNIT AND OUTDOOR UNIT
∗ Match the terminal block numbers and connection
cord colors with those of the indoor unit.
∗ Erroneous wiring may cause burning of the electric
parts.
∗ Always fasten the outside covering of the connection
cord with cable clamps.
(If the insulator is clamped, electric leakage my occur.)
(1) 2-ROOM MULTI type
Fig. 15
Terminal block
INDOOR UNIT A
terminal block
INDOOR UNIT B
terminal block
Power
Supply
OUTDOOR UNIT
or
Connection cord
(2) 2-ROOM MULTI type (AO20R / 24R)
Fig. 16
[Heat & Cool model (Reverse cycle model)]
Terminal block
Cord clamp
Terminal
block
(3) 2-ROOM MULTI type (AO24A)
Fig. 17
[Cooling model]
Terminal block
Cord clamp
Terminal
block
– 22 –
Power cord