Specifications - Panasonic KX-PX10M Operating Instructions Manual

Specifications

Power Source AC adaptor
Input voltage: 100 V to 240 V AC ±10% 50/60 Hz
Rated output: 24 V DC, 1.8 A
Power During printing: Approx. 70 W
Consumption When the power lamp is lit in green: Approx. 6 W
When the power lamp is lit in red: Approx. 1.5 W
Printing System Dye-Sublimation Thermal Transfer
Postcard size: Approx. 65 sec./sheet
1
Printing Speed
Wide size:
Ink Sheet Cassette System (exclusive)
(yellow, magenta, cyan and overcoat)
Printing Paper Postcard size: 3.98 x 7.09 (101 mm x 180 mm)
Wide size:
Paper Feed Automatic paper feed system
Method (holds 18 sheets of postcard size paper, or 20 sheets of wide size
paper)
Image Quality 256 levels/color
Printing 300 x 300 dpi
Resolution
Number Maximum of 20,000
of Images
Displayable
Maximum Pixels 6144 x 4096 pixels
of Image
Print Head Thermal
Input Terminal PictBridge: PictBridge terminal (front panel: 1)
For personal computer: USB port (Type B) (rear panel: 1)
Output Terminal Video: RCA pin jack (rear panel: 1) 1.0 Vp-p, 75 ohms
Compatible SD Memory Card, miniSD Memory Card, MultiMediaCard
Memory Card Format: DOS (FAT16) format
Image formats:
• JPEG baseline (SD-Picture, DCF (Design rule for Camera File
system), Exif, JFIF)
• TIFF (uncompressed) (conforms with Baseline TIFF Rev. 6.0 RGB
Full Color Images)
You cannot print TIFF format images from PictBridge devices such as
digital cameras.
1 This is the time required from the start of printing the yellow layer to the end of printing
the overcoat. The printing speed given is approximate and may change depending on the
temperature.
Approx. 75 sec./sheet
(After cutting: 3.98 x 5.98 (101 mm x 152 mm))
3.98 x 8.19 (101 mm x 208 mm)
(After cutting: 3.98 x 7.09 (101 mm x 180 mm))
104