Settings and Printing
■ SNMP
Name
Authentic
Community
Use Authentic Trap
TRAP Community
TRAP Address
SysContact
SysName
SysLocation
Maintenance and Spec.
Factory Default
******
DISABLE
public
0.0.0.0
NULL
NULL
NULL
Network
Network
Description
Sets SNMP authentic community name.
This community name is authenticated
when receiving SNMP Set Request.
Enables or disables authentic TRAP.
Enters TRAP community name. This name
will be used when the printer executes a
TRAP.
Enters the TRAP address. The TRAP
address is disabled if the IP Address is set
0.0.0.0.
Enters SysContact for MB-II object.
Normally enter the administrator's mail
address.
Enters SysName for MB-II object. Normally
enter the host name or domain name.
Enters SysLocation for MB-II object.
Normally enter where the printer is located.
93
Appendix