Panasonic Jetwriter KX-P7305 User Manual page 229

Settings and Printing
10
Click [OK].
11
Click Setup menu and click Restart the printer.
12
Click [OK] to restart the printer.
13
Click the printer assigned the IP Address and click Network Setup... from
the Setup menu.
• If a password is set, you must enter the password and click [OK].
14
Click the AppleTalk icon.
15
Confirm the Use AppleTalk Protocol check box is checked.
• If needed, change the Printer Name and enter the Zone Name.
16
Click [Setup].
• If the setting is changed, proceed to the next steps. If the setting is not changed, click
[OK] to exit the setting window.
17
Click [OK] to send the setting to the printer.
The confirmation window is displayed.
18
Click [OK].
19
Click Setup menu and click Restart the printer.
20
Click [OK] to restart the printer.
Maintenance and Spec. Network
Network
Setup in Macintosh
46