Advertisement
• When the appliance displays "FILL TANK", fill the tank with water or the appliance will not deliver coffee. (It is
normal for there to be a little water left in the tank).
• After about 14 single (or 7 double) coffees, the
appliance displays "EMPTY WASTE COFFEE
CONTAINER".
To clean, open the service door on the front of
the appliance by pulling the spout (fig. 16),
extract the drip tray (fig. 17) and clean. When
cleaning, always extract the drip tray
completely.
When extracting the drip
tray, the waste coffee
container MUST always be
emptied. If this is not done,
the machine may be
clogged.
• Never extract the water tank while the machine is delivering coffee. If it is removed, it will not be possible to
make the coffee and the appliance will display "GROUND TOO FINE ADJUST MILL AND PRESS OK" and then
"FILL TANK". Check the level of water in the tank and replace in the appliance. To turn the machine on again,
press the OK icon (B9). "HOT WATER PRESS OK" is displayed. Press the OK icon (B9) within a few seconds
and deliver water from the cappuccino maker for about 30 seconds. When delivery stops, the basic modes are
displayed again.
The coffee maker may request the operation to be repeated a number of times until the air
is completely elminated from the hydraulic circuit.
If this operation is not performed correctly or if the machine is turned off, the basic modes
may be displayed, although the problem is in fact still present.
Changing the quantity of coffee in the cup
The appliance is set by default to automatically make the following types of coffee:
https://producthelp.fisherpaykel.com/Manuals/Companion_Product_Manuals/User_Guides/590336D_Coffee_Maker/07_Makin...
Updated: Mon, 10 Apr 2023 16:30:45 GMT
Powered by
2
Advertisement
