NEC P627UL Manual page 6

Handling the power cord
• Please use the power cord supplied with this projector. If the supplied power
cord does not satisfy requirements of your country's safety standard, and
voltage and current for your region, make sure to use the power cord that
REQUIRED
conforms to and satisfies them.
• The power cord included with this projector is exclusively for use with this
projector. For safety, do not use it with other devices.
PROHIBITED
• Handle the power cord with care. Damaging the cord could lead to fire or
electric shock.
- Do not place heavy objects on the cord.
HAZARDOUS
- Do not place the cord under the projector.
VOLTAGE
- Do not cover the cord with a rug, etc.
- Do not scratch or modify the cord.
- Do not bend, twist or pull the cord with excessive force.
- Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.), ask
your dealer to replace it.
• Do not touch the power plug should you hear thunder. Doing so could result
in electric shock.
WARNING
• The power cord you use must be approved by and
comply with the safety standards of your country.
Please refer to the page 132 about the power cord
specification.
Rated voltage by country is listed below for your refer-
ence. For selecting an appropriate power cord, please
check rated voltage for your region by yourself.
AC 230 V European countries
AC 120 V North America
EN-3