NEC P627UL Manual page 12

Laser Safety Caution
Obey the laws and regulations of your country in relation to the installation and management of
the device.
For China
This product is classified as Class 2 of GB 7247.1-2012.
WARNING
CLASS 2 LASER PRODUCT OF GB 7247.1-2012
• LASER RADIATION - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT.
• Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Laser energy exposure near aperture may cause burns.
For other regions
This product is classified as Class 1 of IEC 60825-1 Third edition 2014-05 and RG2 of IEC/EN 62471-5
First edition.
WARNING
CLASS 1 LASER PRODUCT OF IEC 60825-1 THIRD EDITION
• Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Laser energy exposure near aperture may cause burns.
USA only
• Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as
defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019.
WARNING
• Do not allow to look into the projector beam at any distance from the projector. An adult
should supervise the children to prevent exposure risks.
• Check that there is no one looking at the lens, when using the remote control for starting the
projector.
• Do not look at the projected light using optical devices(binoculars, telescopes, magnifying
glasses, reflectors, etc).
• [ WARNING: MOUNT ABOVE THE HEADS OF CHILDREN. ]
The use of a ceiling mount is recommended with this product to place it above the eyes of
children.
• Outline of laser emitted from the built-in light module:
- Wave length: 449 – 461 nm
- Maximum power: 112 W
• Radiation pattern from the protective housing:
- Wave length: 449 – 461 nm
- Maximum laser radiation output: 1.7 W (IEC 60825-1 Ed.3 Class 1)
66.6 mW (IEC 60825-1 Ed.2 Class2)
EN-9