Denon RCD-M40 Service Manual page 21

4.3. Pickup movement
(1) Press the " 8 /-" and "+/ 9 " buttons to move the pickup to the inner or outer circumference.
Release the button to stop the pickup.
(2) You can also stop the pickup by pressing the " 8 /-" button. After the inner switch is set to on, the pickup stops.
(3) Release the button to stop the pickup.
4.4. Stop
(1) Press the " 2 " button to stop the playback operation and servo.
(2) After stopping, the auto adjustment values will be read.
4.5. All servo on
• Press and hold the "SOURCE" button for five seconds to turn all servos on.
The playback operation starts after automatic adjustment is performed (playback sound is output).
" 13 "
( 13 flashes / @@ : T.No / XX:XX : time)
4.6. Adjustment value display
(1) When "DIRECT" button is pressed, the adjustment values are displayed in the following order.
q FOCUS BALANCE
" 13 "
X X X X
F O C U S
( 13 flashes / XXXX : adjustment values)
w FOCUS GAIN
" 13 "
X X X X
F O C U S
( 13 flashes / XXXX : adjustment values)
e TRACKING BALANCE
" 13 "
X X X X
T R A C K I N G
( 13 flashes / XXXX : adjustment values)
r TRACKING GAIN
" 13 "
X X X X
T R A C K I N G
( 13 flashes / XXXX : adjustment values)
t FOCUS OFFSET
" 13 "
X X X X
F O C U S
( 13 flashes / XXXX : adjustment values)
y TRACKING OFFSET
" 13 "
X X X X
T R A C K I N G
( 13 flashes / XXXX : adjustment values)
u RFRP
" 13 "
X X X X
R F R P
( 13 flashes / XXXX : adjustment values)
@ @ Tr X X : X X
B A L A N C E
G A I N
B A L A N C E
G A I N
O F F S E T
O F F S E T
21