Brother QL-500 Software Installation Manual page 9

6
After restarting the computer,
connect the USB cable to the
machine.
Remove the caution label from the USB port
at the back of the machine, and insert the
USB cable.
7
Connect the USB cable to the USB
port of your Macintosh®.
Then press the ON/OFF button ( ) on the machine to switch it on.
If you are connecting the machine to your Macintosh® via a USB hub, it may not
be detected correctly. If so, connect the machine directly to the USB port on
your Macintosh®.
8
• For Mac OS
Double click the drive where Mac OS
[Applications] - [Utilities] - [Printer Setup Utility].
• For Mac OS
Click in order of [Apple menu] - [System Preferences], and click [Print & Fax].
9
• For Mac OS
Click [Add] and choose USB at the top of the screen.
Choose "QL-XXX" from the list and click [Add] again to add the printer to the
[Printer List].
• For Mac OS
Choose "Brother QL-XXX" from the list and click [Add] /
the [Printer List] / [Print & Fax].
10
When the screen returns to [Printer List] /
[Print & Fax] screen, check that "QL-XXX" is
added, and close the [Printer List] / [Print &
Fax] screen.
Now you can use the machine.
For details on software, see the P-touch Editor Help.
8
®
X 10.3.9 - 10.4.x
®
X 10.5.x - 10.6
®
X 10.3.9 - 10.4.x
®
X 10.5.x - 10.6
Connect to QL
USB port.
®
X is installed, and click in order of
Connect to personal
computer USB port.
to add the printer to