Noise Emissions Maintenance And Maintenance Record Log - Sullair 1600H T4F Perkins User Manual

8: Noise Control

8.3 Noise emissions maintenance and maintenance record log

The following instructions and maintenance record log book, for the proper maintenance, use and repair of this com-
pressor, is intended to prevent noise emission degradation.
Table 8-1: Annual muffler and exhaust system inspection
At least annually inspect muffler(s) and engine exhaust system to make sure all parts are securely mounted, that all joints and
connections are tight, and that the muffler is in good condition. Do not operate compressor with defective exhaust system.
Remove and replace any defective parts by ordering with part numbers indicated in the Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Table 8-2: Annual air filter(s) and air inlet system inspection
In addition to the instructions in the Maintenance section of the Operator's Manual, the air filter(s) and entire air inlet system
should be inspected at least annually, to make sure all parts are securely mounted, that all joints and connections are tight,
that there are no other leaks in the system, and that the filter element(s) are intact. Do not operate compressor with defective
air inlet system. Remove and replace defective parts by ordering with part numbers indicated in the Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
74
02250248-733 R03
Subject to EAR, ECCN EAR99 and related export control restrictions.
1600H T4F PerkinsUser Manual