Sullair 1600H T4F Perkins User Manual page 53

1600H T4F Perkins User Manual
Table 6-1: Home display items and functions
Key Description
1 Indicator lamps
2 Service pressure gauges
3 Status bar
4 Information bar
Diesel exhaust fluid (DEF)
5
level gauges
6 Message bar
7 Diesel fuel level gauge
Function
Displays status and malfunction indicator lamps. See Section 1.15:
Symbols and references on page 12 for definitions of symbols.
Displays service (tank) pressure.
Displays current operating status of compressor:
READY: Controller is initialized and compressor is ready to start.
ENGINE CRANKING: Starter is engaged and cranking engine.
WARM UP CYCLE: Engine is started and compressor is in warm-up
state.
READY FOR AIR: Warm-up cycle is complete and machine is ready to
deliver air.
AIR AVAILABLE: LOAD button has been pressed, air is being deliv-
ered and compressor is operating in automatic mode.
STOP INITIATED: Switch has been turned to off and compressor is in
cool-down period.
MONITORING PRESSURES: Engine is stopped and controller is
monitoring pressures until less than 2 psig (0.14 bar) before controller
is turned off.
Displays compressor and engine parameters. Left and right arrows
can be used to scroll through parameters. Can also be accessed by
pressing INFO button.
Displays remaining level of DEF. A warning message will be provided
on low DEF level. Engine de-rate and shutdowns will occur if DEF is
not refilled.
Displays service reminders and warning/fault messages.
Displays remaining level of fuel. A warning message will be provided
on low fuel level. The controller will shut the compressor off on very
low fuel level in order to protect the engine.
02250248-733 R03
Subject to EAR, ECCN EAR99 and related export control restrictions.
6: Controller
53