Table of Contents
Advertisement
3
Read the LIMITED USE LICENSE AGREEMENT
Before removing the seal covering the power switch, read the LIMITED USE LI-
CENSE AGREEMENT.
4
Insert the two battery packs
Main Battery Pack Slot
Turn over the computer, then unlock the cover by
1
sliding the latch to the right.
Slide the latch down, and then without releasing it,
2
open the cover as illustrated.
3
Firmly attach the battery pack to the connector as
illustrated.
Close the cover, then lock it by sliding the latch to
4
the left.
CAUTION
Be sure to insert the battery pack as illustrated.
Be sure the battery pack is properly connected to the connector.
For an improperly attached cover, your battery pack may fall out while you are
carrying around your computer.
Be sure the tab does not get caught when closing the cover.
5
Open the cover of the expansion bus
connector, then connect your com-
puter to a port replicator
Second Battery Pack Slot
Latch
Cover
Tab
Expansion Bus Connector
1
3
Port Replicator
(
page 40)
Bottom
1
2
4
3
Battery Pack
2
13
Advertisement
Table of Contents
