Changing The Speaker Setting To Suit Your Speakers; Reference - Panasonic DVD-S97 Operating Instructions Manual

∫ "HDMI" tab
HDMI RGB Range
Set "HDMI Color Space" to "RGB" (
Picture Menu) .
HDMI Video Mode
HDMI Audio Output
∫ "Display" tab
Menu Language
On-Screen Messages
Background during Play
Select background during JPEG and
MPEG4 playback.
∫ "Others" tab
FL Dimmer
Changes the brightness of the unit's display.
Auto Power Off
QUICK SETUP
Re-initialize Setting
This returns all values in the Setup menus to
the default settings.
§1
The original language designed on the disc is selected.
§2
Input a code number referring to the table on page 20.

Changing the speaker setting to suit your speakers

If you select "Multi-channel" (
preference if desirable.)
Front (L)
a
L
Exit
Exit
Test
Test
LS
signal
— Surround —
(LS)
a c b
Speaker presence and size (a)
1. Press [3 4 2 1] to select an item and press [ENTER].
2. Press [3 4] to change the content and press [ENTER].
Icon examples:
Surround speaker (LS)
≥ Large: Select when the speaker supports low-frequency (under 100 Hz)
reproduction.
≥ Small: Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to "No", the front speakers will automatically be set
to "Large". (In this case, we recommend connecting a speaker that can
reproduce bass below 100 Hz.)
≥
Standard
page 14, ≥
Enhanced: When the black and white images are not distinct.
≥
On: When video output is from HDMI AV OUT terminal.
≥
Off: When video output is from COMPONENT VIDEO OUT terminal (output is 480p from HDMI AV
OUT terminal).
≥
On: When audio output is from HDMI AV OUT terminal.
≥
Off: When audio output is not from HDMI AV OUT terminal.
≥ ≥
English
≥ ≥
On Off
≥ ≥
Black Gray
≥ ≥
Bright Dim
≥
Auto:The display is dimmed during play, but brightens when you perform some operations.
≥
On: The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.
≥
Off
≥ ≥
Yes No
≥
Yes: The password screen is shown if "Ratings" (
After "INIT" on the display disappears, turn the unit off and on again.
≥
No
page 16, "Speaker Settings" in "Audio" tab), the following setting (a) is required. (Select settings b c to suit your
Center Front (R)
a
b a c
R
m s d B
C
0.0 0
d B
SW
0
d B m s d B
RS
0 0.0 0
(RS) Subwoofer
c a
c a
LS
LS
Large Small
≥
Français Español
§3
If the language selected for "Audio" is not available, subtitle appear in
that language (If available on the disc).
Delay time (b)
(Effective when playing multi-channel audio)
If either distance d or f is less than e, find the difference in the relevant
table and change to the recommended setting.
1. Press [3 4 2 1] to select an item and press [ENTER].
2. Press [3 4] to change the content and press [ENTER].
: Recommended placement
L
C
d
LS
Channel balance (c)
No
This does not work when connected with HDMI terminals and "HDMI
Audio Output" ( above, "HDMI" tab) is set to "On".
1. Select "Test" and press [ENTER].
A test signal is output.
Front (L)_—)Center_—)Front (R)
:
Surround (LS)(—————=Surround (RS)
2. While listening to the test signal, press [3 4] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers (s6 to r6dB).
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3 4 2 1] to select "Exit" and press [ENTER].
page 16) is set. Please enter the same password.
d Center speaker
Difference
Approx. 34 cm (1
Approx. 68 cm (2
R
Approx. 102 cm (3
Approx. 136 cm (4
e
Approx. 170 cm (5
SW
f Surround speakers
f
Difference
RS
Approx. 170 cm (5
Approx. 340 cm (11 feet)
Approx. 510 cm (16
;
Setting
⁄
1 feet) 1.0 ms
10
⁄
1 feet) 2.0 ms
5
⁄
3 feet) 3.0 ms
10
⁄
2 4.0 ms
feet)
5
⁄
1 feet) 5.0 ms
2
Setting
⁄
1 feet) 5.0 ms
2
10.0 ms
⁄
feet) 15.0 ms
1
2
17
17