Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French or Spanish Language, please see your Land Pride dealer. Printed 4/4/23...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SGC1560, SGC1572, & SGC1584 Claw Grapples 380-074M 4/4/23...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Download the appropriate for Land Pride products. App on your smart phone. Scan the QR Refer to Parts Manual QR code and take a picture. Locator on this page for detailed instructions. SGC1560, SGC1572, & SGC1584 Claw Grapples 380-074M 4/4/23...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard Careful operation is your best to personal safety and extra precaution must be taken.
Page 6
Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- A slow moving power machine Never carry riders on the power structures (ROPS) and seat belt can create a hazard when driven machine or attachment.
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid Crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (Quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 4/4/23...
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 11
Table of Contents Important Safety Information This Page left blank intentionally. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Table of Contents Introduction Introduction Serial Number Land Pride welcomes you to the growing family of new product owners. This grapple has been designed with For quick reference and prompt service, record model care and built by skilled workers using quality materials.
3. Wait for all components to come to a complete stop have all needed parts and equipment readily at hand. before leaving the operator’s seat. 4. Use steps, grab-handles, and anti-slip surfaces when stepping on and off the power machine. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Page 14
(#3B) and tighten. u-bolt as follows: 10. Continue with “Connect Grapple to a Power a. Remove nuts (#11) and move u-bolt (#10) to the Machine” on page 12. opposite side of tees (#1A & #1B). SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Page 15
An Accessory Hydraulic Hose Kit #380-063A is available 5. Attach straight adapters (#11) or 90 elbows (#10) through Land Pride’s Parts and Services for connecting to hydraulic hoses (#8 & #9) and tighten. the grapple to a skid steer or track loader.
Page 16
“Connect Hoses to a Skid Steer or Track 4. Start power machine. Loader” on page 14. 5. If lock mechanism is hydraulic, use auxiliary hydraulic controls to raise the lock pins fully up. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Page 17
Operator’s Manual. IMPORTANT: Make sure coupler fittings on the 5. Continue with “Check Equipment Clearances” on hydraulic hoses and power machine are clean page 15. before connecting them together. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Page 18
Refer to your power machine Operator’s Manual for 4. For additional help, refer to hydraulic connection more instructions. instructions in your power machine Operator’s Manual. 5. Continue with “Check Equipment Clearances” on page 15. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Keep bystanders, pets, and livestock away from your work injury or death from falling and machine overturn. area. Never allow anyone to go near or under the attachment or its load. The attachment and/or load can fall. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Always call 811 (USA) or local utility companies before digging so that they can mark the location of underground services in the area. For contact information, see Dig Safe in the “Important Safety Information” starting on page 1. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Before traveling with a loose load, lower load to ground, release load, and re-clamp load to make it more secure. 12. Position load at a safe, low traveling height before transferring to unloading site. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Page 23
8. Leave enough clearance when turning and/or lowering the grapple so that it does not make contact with obstacles such as vehicles, buildings, trees, or fences. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Page 24
5. Refer to Figure 1-4 on page 13 or Figure 1-5 on page 14: Disconnect hydraulic hoses (#4 & #5) from the power machine and store hoses on the grapple. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
Page 25
Proceed by getting onto the seat of your tractor or skid steer and starting it up. It isn’t going to take you long to learn how to use your new Land Pride Claw Grapple, but we do recommend that you take a little time to practice securely attaching and detaching your grapple to and from your mounting plate.
3. Repaint parts where paint is worn or scratched to actuated even when power to the hydraulics is off. prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding WARNING TU, QT, or GL to the end of the aerosol part number.
1 1/4" Pivot pins Large diameter pins for extra strength. Dual hydraulic cylinders Allows upper jaw to grip the material better. Grade 80 teeth material More than double the strength of mild steel. 4/4/23 SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M...
Prying objects out of the ground. Never use grapple to pry objects. Wedging objects between teeth with upper Do not wedge objects between teeth with jaw. upper jaw. SGC1560, SGC1572, & SGC1584 Claw Grapples380-074M 4/4/23...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.