Advertisement
7
on your speakers, and that the black (-) terminals on your amplifier are connected to the black (-) terminals on your speakers.
7. Ensure that the four fixing screws on the speaker are slackened off allowing the mounting dog-legs to move freely. Move each dog-leg foot to the
LEFT into its holding slot and then line the speaker up in the mounting hole.
8. With the speaker in the mounting hole use a cross-head screwdriver to slowly turn each fixing screw clockwise, moving the dog-legs out of their
slots. Tighten these screws until the dog-legs grip the ceiling.
Note: Please check with your builder/installer whether you need to install a fire hood with this product. "Low smoke/zero halogen" specification
Speaker cable may also be required.
Advertisement
