目錄 C165SS Ceiling Speaker ..........................................Introduction ............................................... What's included with the C165SS? ......................................Installation Instructions ..........................................Painting the speaker grille and frame ...................................... Technical specifications ..........................................
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
Installation Instructions Last updated: 一月 19, 2023 01:55. Revision #8398 1. Firstly, remove the cardboard pad from inside the supplied template to mark the position for the mounting hole at the selected location. 2. Before cutting ceiling speaker holes, it is suggested that the area is tested for clearance by making an L-shaped probe from strong wire (see illustration below), drilling a small hole in the target area, inserting the probe and slowly turning.
Page 7
on your speakers, and that the black (-) terminals on your amplifier are connected to the black (-) terminals on your speakers. 7. Ensure that the four fixing screws on the speaker are slackened off allowing the mounting dog-legs to move freely. Move each dog-leg foot to the LEFT into its holding slot and then line the speaker up in the mounting hole.
Painting the speaker grille and frame Last updated: 一月 19, 2023 01:55. Revision #8399 The C165SS speaker grille is attached by a magnet, allowing it to be easily removed for painting. 1. Carefully remove the grille ensuring not to damage the speaker cone.