Panasonic Toughbook CF-T5MWETABM Reference Manual page 92

Troubleshooting (Advanced)
An error occurs while installing the driver
Check that the driver is supported by the operating system. If you use an incompatible driver, malfunction may occur.
Set the [Execute-Disable Bit Capability] to [Disable] in the [Security] menu of the Setup Utility. If the error is not resolved, it
is possible that the driver being used is not compatible with the Data execution prevention function. For a driver, consult
the peripheral manufacturer.
The device will not operate properly if a different mouse driver is installed
When you install a different mouse driver, such as IntelliPoint for Microsoft's IntelliMouse, the mouse driver currently
installed in the computer may need to be uninstalled.
For information on how to uninstall the driver, refer to "When Using an External Mouse." (
If not using the Touch Pad, and using an external mouse only, set [Touch Pad] to [Disable] in the [Main] menu of the Setup
Utility. ( page 69) And uninstall the mouse driver that is installed on this computer.
A PC Card does not work
Confirm that the card conforms to the PC Card Standard.
Make sure the card is properly inserted (
Check that the proper port settings have been made.
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
A
Double-click [PCMCIA adapters], and double-click the relevant device.
B
In [Resources], if [Conflicting device list] shows [No conflicts], there is no conflict.
Read the instructions supplied with the PC Card, or consult the PC Card manufacturer.
Check that you are using a driver supported by the operating system.
You do not know the available RAM module
Refer to Operating Instructions "Expanding Memory" or "Specifications".
To check if the additional RAM module has been installed successfully
If the installation is successful, the main memory and total RAM module size appears in the [Information] menu of the
Setup Utility ( page 68).
If the RAM module is not confirmed:
• Turn the computer off and reinsert the RAM module.
page 39).
92
page 53)