Panasonic Toughbook CF-T5MWETABM Reference Manual page 78

Recover Pro
Recover Pro is a data backup software application developed by Phoenix Technologies Ltd. It provides 3 types of backup as
follows:
• Quick Backup: Scheduled backup of the updated data
• File Backup: File backup at file save and change
• Complete Backup: Backup of the entire data on the hard disk or on the selected drives
For further information, refer to the software's online manual.
Installing Recover Pro
1
Log on to Windows as an administrator.
2
Close all the applications.
3
Click [start] - [Run] and input [c:\util\rcvpro\setup.exe], and click [OK].
Follow the on-screen instructions.
After the computer restarts, Recover Pro starts initialization. Do not press keys or switch including hot key, during
initialization until an instruction message appears.
NOTE
When executing a [Typical] installation on a drive with multiple partitions,
the backup area is created using the space of the drive you selected.
the backup area is created using the space of the drive which has larger empty space.
the backup area is created using the entire space of all drives.
If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the backup
area.
You cannot change the size of backup area after creation.
To access the online manual
Click [start] - [All Programs] - [Phoenix Applications] - [Docs] - [UserGuides] - [UG_RecoverPro6_En_EN] /
[UG_PhoenixAlways_En_EN].
78