Display Rotation; Rotating The Display; Changing The Settings - Panasonic Toughbook CF-F8EWAZZJM Reference Manual

Display Rotation

<Only for CF-T8 Series>
After Windows is started up, you can rotate the display and perform the Touch Pad and touchscreen operations in the rotated
mode.

Rotating the Display

1
Double-click
Each time this operation is performed, the screen display switches between the landscape mode (0 degree) and the
previously set angle (below).
To select the angle and rotate the display
1
Right-click
You can select rotation angles of 90, 180, or 270 degrees from the landscape mode.
NOTE
Be sure to use the above procedures to rotate the display.

Changing the Settings

By using the Display Rotation Tool, you can change the settings of the display rotation.
1
Right-click
2
Change the settings.
A. Changing the key combination
B. Changing the angle
(Default: 180 degrees)
3
Click [OK].
NOTE
If you shut down Windows when you rotate the display, the Touch Pad and touchscreen do not match the display angle
next time you start up Windows for a few seconds.
on the notification area or press
on the notification area, and then select the angle.
on the notification area, and then click [Setting...].
+ .
Alt X
19
A
B