Usb Devices - Panasonic Toughbook CF-74JDMBD2M Reference Manual

USB Devices

Connecting/Removing USB Devices
Preparation
Before connecting a USB device, first determine the media that contains the device's driver (e.g., CD-ROM), then
attach the device for that media to the multimedia pocket. Once the installation screen for the device's driver appears,
equipment you then connect to the multimedia pocket will not be recognized.
To connect the USB device
1
Open the cover and connect the USB device to one of the USB
ports (A or B) on the computer.
For further information, refer to the instruction manual of the USB device.
To remove the USB device
1
Disable the USB device.
Double-click
A
[Stop].
Follow the on-screen instructions.
B
This step is not necessary when;
• Removing the device after turning off the computer.
• is not displayed.
• The device does not appear in the list in step A.
2
Remove the USB device.
NOTE
You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-
ual of the USB device.
You may need to install the driver again when connecting the device to another port.
When a USB device is connected, standby and hibernation may not function normally. If the computer does not start
up normally, remove the USB device and restart the computer.
When the USB device is removed and then inserted,
correctly recognized. In this case, remove and connect the device again.
on the notification area and select the USB device, then click
may appear in the Device Manager and the device may not be
48