Turn On The Computer - Panasonic Toughbook CF-74CCB02BM Operating Instructions Manual

First-time Operation
3
2
1
3
NOTE
Regarding Windows XP
You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs
on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).
Windows Update
You can update to the latest patches and service packs for Windows with the following menus.
[start] - [All Programs] - [Windows Update]
Do not apply "Driver Updates" even if a message to update a driver appears. If a driver update is required,
contact Panasonic Technical Support (
If the message "Your computer might be at risk" is displayed
Select (red icon) on the taskbar and make the appropriate settings. The Windows Security Center regularly
gives you notice so that you can make the optimum settings. This is not an error message and you can use the com-
puter. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.
12
3

Turn on the computer.

A Pull the carrying handle forward.
B Lift up the latch (A) and lift open the display.
C Press and hold the power button
A
power indicator
CAUTION
Do not press the power button repeatedly.
The computer will forcibly be turned off if you press and hold the power button for
four seconds or longer.
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
Do not perform the following operation until the hard disk drive indicator
• Connecting or disconnecting the AC adaptor
• Pressing the power button
• Touching the keyboard, touch pad, touchscreen (only for model with touch-
screen) or external mouse
• Closing the display
When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support (
4 Setup Windows.
A Follow the on-screen instructions.
CAUTION
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If "An unexpected error has occurred..." (or a similar message) is displayed,
select [OK]. This is not a malfunction.
Wait until the hard disk drive indicator
5 Create a new account.
A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
6 Perform the touchscreen calibration.
A Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
B Using the stylus, touch each of the 12 "+" target marks one by one until it
blinks, and then click [Calibration].
C Click [Save & Exit].
page 30).
for approximately one second until the
lights.
page 30).
has turned off.
turns off.