Wireless Switch; Disabling/Enabling Wireless Communication - Panasonic Toughbook CF-19KHRAG2M Reference Manual

Disabling/Enabling Wireless Communication

<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>
There are five ways of disabling and enabling wireless communication.
The wireless switch on the front of the computer (below)
Wireless Switch Utility (
Settings in the Network and Sharing Center (
Settings in the [Advanced] menu of the Setup Utility (
Setting in the Wireless Connection Disable Utility (
NOTE
For further information about Wireless LAN:
For further in formation about Bluetooth:
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The wireless communication is also enabled or disabled by connecting or disconnecting the LAN cable. (
The Wireless Switch
1
Open the cover.
Slide the latch (A) to the right to unlock the cover.
A
Slide the latch (A) down, and open the cover.
B
To disable all wireless communication
2
Switch (B) to OFF
To enable wireless communication
2
Switch (B) to ON
In the default setting, the wireless switch enables all wireless devices when it is
set to ON.
page 57)
page
page 61
page 66
61)
page 73)
page 59)
56
page 59)