Carrier DHMVHA Service Manual page 50

:
DISASSEMBLY INSTRUCTIONS (CONT.)
NOTE: Remove the front panel and electrical parts before disassembling the evaporator.
Procedure
1) Disassemble the pipe holder located at the
rear of the unit.
2) Remove the screws on the evaporator
located at the fixed plate.
3) Remove the two screws on the evaporator
located at the base of the bearing side.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Illustration
Pipe Holder
Screws
Screws
50