Panasonic Toughbook CF-18BCAGCMM Supplementary Manual page 9

5
When the "Protector Suite ∗.∗ has been successfully
installed." message appears, click [Finish].
At the confi rmation message, click [Yes].
The computer restarts.
6
Log on to Windows as an Administrator.
The "Protector Suite QL Icon"
Step 3 TPM Fingerprint Utility Initialization
Performed by the Computer Administrator.
The "Invalid TPM status" message is displayed by the "Protector Suite QL Icon"
in the notifi cation area.
If the TPM is not being used, skip this step.
1
Click on the "Invalid TPM status" message to start
"Advanced Security Initialization Wizard".
Follow the on-screen instructions.
NOTE
If the "Invalid TPM status" message is not displayed
<Model with Windows XP>
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center] -
[Settings] - [System Settings] - [TPM] - [Initialized TPM].
<Model with Windows Vista>
Click (Start) - [All Programs] - [Protector Suite QL] - [Control Center] -
[Settings] - [System Settings] - [TPM] - [Initialized TPM].
appears in the notifi cation area.
9