Replacing Belt; Cleaning Agitator - Panasonic MC-V5268 Operating Instructions Manual

Replacing Belt

➢ ➢ Reinstall agitator back into nozzle
housing grooves.
➢ ➢ Close rear belt cover and reinstall felt
packing.
➢ ➢ After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢ ➢ Reinstall lower plate.

Cleaning Agitator

➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
- 30 -