2 Insert the plug into the SP/MIC jack on the transceiver, then fix it
with a nut.
•
Fix the plug with a nut firmly to maintain waterproof protection for the
transceiver.
•
The transceiver is not fully water protection when using a speaker/
microphone or headset.
•
When not using an optional speaker/ microphone, clip mic. with earphone,
or headset, to keep the transceiver dust and water protection, you must
cover the SP/MIC jack with the cap securely with no gap.
Plug
SP/MIC jack cover
Note:
◆ If the plug is not fully inserted, when the transceiver power is turned ON, a
beep sound will be heard and "
INSTALLING THE BELT CLIP
Nut
" will be displayed.
If necessary, attach the belt clip using
the two supplied M3 x 6 mm screws.
Note:
◆ If the belt clip is not installed, its
mounting location may get hot during
continuous transmission or when left
sitting in a hot environment.
11