Panasonic KX-MB2000 Operating Instructions Manual page 56

9. Programmable Features
Feature/Code
Selecting the scale
MBNM1NM4NM7N
Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N
Setting the toner
maintenance time
MBNM1NM5NM8N
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
Setting the ringer pattern
MBNM1NM6NM1N
(KX-MB2030 only)
Setting the beep sounds and
keytones
MBNM1NM6NM5N
56
Selection
M1N "MILLIMETERS"
M2N "INCHES" (default)
Note:
R The selected scale will be used when measurements are shown on the
unit's display.
1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN
R The default password is "1234".
3. Enter a new 4-digit password using 0–9. A MSetN
4. Enter the new password again. A MSetN A MMenuN
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser (LAN
connection only).
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit's noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is "12:00PM".
R Press MGN repeatedly to select "AM" or "PM".
3. MSetN A MMenuN
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB2030 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M0N "NO" (default)
M1N "YES"
R Disconnect the telephone line cord (KX-MB2030 only), USB cable and LAN
cable before activating this feature.
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select "YES". A MSetN
3. Press M1N to select "YES". A MSetN
M1N "A" (default)
M2N "B"
M3N "C"
M0N "OFF": Deactivate this feature.
M1N "ON" (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to "OFF", the unit beeps in the following cases:
– the memory reception alert setting (feature #437 on page 61) is
activated (KX-MB2030 only).
– the top cover is opened.