Core Unit Label - Sony Xperia Z2 Working Instructions

Replacement

4.15 Core Unit Label

Carry out the Removal as described below.
Prepare the new Core Unit Label.
Carry out the Installation as described below.
REMOVAL
Read the old Core Unit Label and write the information
into the ''LabelPrint Solution' program.
Open the Cap SD and pull out the Label Tray.
Remove the Core Unit Label.
Scrap Core Unit Label, not to be reused.
Remove and clean any remaining adhesive residue found
on Label Tray.
INSTALLATION
Check that the proper label format is loaded in the Zebra
printer and write a new Label by using the 'Label Print'
software.
Place and align a new Core Unit Label in the correct
position. Press with a finger to secure the attachment.
One label only is allowed.
1285-2552 Rev 8
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
22(80)