Press the Dial button.
►
An * is displayed after the selected
module (in this case Module 2).
Activate Teach-in mode at the socket switching module within four
►
minutes (see Chapter "Activating the Teach-in mode at the switching
module on Page 5).
Installing socket switching module HS 20 to Hometronic
Manager as a collection relay
Example: Installing socket switching module HS 20 as a collection
relay.
Activate Teach-in mode at the HS 20 as described on Page 5.
►
Change to the "Settings" submenu as described on Page 7.
►
Turn the Dial button to the left in order
►
to move the cursor to the "Settings"
submenu.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button to the left until
►
"Boiler request" is selected.
MODULE-1
MODULE-2
MODULE-3
MODULE-4
HEATING/COOLING
SHUTTERS
DEVICES/LIGHT
SENSOR
SENSOR
SETPOINT ADJUSTER
ROOM CONTROL
BOILER REQUEST
Teach-in
*
9