Power switch
The power switch can be found on the underside of the Free3
Wireless. Make sure the power switch is set to ON before pairing
with your computer.
The Free3 Wireless features an optimized power management. Turning
off the device is only necessary for permanent storage or during travel.
RollerMouse Free3 Wireless user manual
Connecting to a computer
4
Plug the wireless receiver
or the charging cable
the computer's USB port. Allow your computer a few seconds
to automatically install.
USB 2.0 cable adapter
5
This cable
provides a stronger connectivity* for wireless 2.0 USB
devices when connected to USB 3.0 hubs.
If you find the reception of the device is not optimal, please use the
included USB cable adapter for your convenience.
* For more information on USB 2.0 wireless products in connection with USB
3.0 hubs, please visit our website at www.contourdesign.co.uk.
6
into
/5