Power switch
The power switch can be found on the underside of the mouse. Make sure the
power switch is on before pairing with your computer.
Connecting to a computer
4
Plug the wireless receiver
or the RollerMouse Free3
6
charging cable
into the computer's USB port. Allow your computer a few
seconds to automatically install.
USB 2.0 cable adapter
5
This cable
provides a stronger connectivity* for wireless 2.0 USB devices
when connected to USB 3.0 hubs.
If you find the reception of the device is not optimal, please use the included
USB cable adapter for your convenience.
* For more information on USB 2.0 wireless products in connection with USB
3.0 hubs, please visit our website at www.contourdesign.com/UK