Advertisement
•DW-86W420J/420JA
14
During the above procedure setting 1P to 5P, you can use "
individually.
For example: The temperature display shows IP (Years), if you do not need to change Years (1P) and
Months (2P), you can adjust Days (3P) directly.
1. Press "
" key to select Days (3P).
2. Press "Set" key, the temperature display shows the date and fl ashes.
3. Press "
" or "
" key to adjust the current date.
4. Press "Set" key to save the change. Then, the temperature display will show Hours (4P).
5. If you need to adjust the Hours, press "Set" key to change the setting. If no adjustments need to be
made, press "
" key, the display shows Minutes (5P), and you can make changes.
6. After having fi nished the settings, press and hold "Set" for 5 seconds, the changes will be saved
and the settings will be automatically exited from. Then, the temperature display will normally show
the inner temperature.
Push for
3 seconds
Push for
5 seconds
During the above procedure setting 1P to 5P, after fi nishing the adjustment of any of the settings, if
no other settings do not need to be changed, you can just press and hold "Set" key for 5 seconds to
save the changes and exit the settings.
Exporting USB data
1. In unlocked mode, insert the USB fl ash drive. The temperature display shows USB which means
data is being exported.
2. When the temperature display shows ALL, exporting of the data is fi nished, please remove the
USB fl ash drive.
• The system memory can save data for 15 years.
Caution
• When export data to USB disk, please use an USB disk with a fi le format of FAT32.
• If the FAT32 USB disk cannot export data, please backup the fi le of the USB disk fi rst
and then format the USB disk or try another brand FAT32 USB disk.
" or "
" key to adjust the settings
19
Advertisement
