Delay - Polaris ASLE-L-100D User Manual

ASLE-L-100D
ㆍ Press the [ESC] key to return to the previous menu.

Delay

Range / Resolution
0 (Bypass), 10 to 530,000us / 1us
Setup Procedures
① Press [Delay] key to set the time delay. The pointer [▶] appears as shown in
[Figure 4-12].
② Press numeric values of delay (valid range: 0 (Bypass), 10 to 530,000us, 1us
steps). To set in us steps, press numeric values and then press the [ENTER]
key. To set in ms steps, press any desired numbers less than or equal to 530,
press the [MHz/ms] key and then press the [ENTER] key.
[Figure 4-11]
[Figure 4-12]
Copyright © 2022 Polaris. All Rights Reserved
User Manual
21