Connection
Example of connecting with PCs
Control PC
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
Note
page 56.
• If your PC has the resume feature (last memory), the computer may not function properly until the
resume capability is disabled.
• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD
terminals. Doing so may disrupt the images since, rather than using synchronization initiated by
the GREEN signal, the sync signals of the SYNC/HD and VD terminals will be used instead. Even
if the images are not disrupted, the white balance may be lost. If this is the case, select "USER" as
the "COLOR TEMP" setting (see page 29), and adjust "W-BAL LOW".
• The white balance may be lost when the SYNC ON RGB signal is input. If this is the case, select
"USER" as the "COLOR TEMP" setting (see page 29), and adjust "W-BAL LOW".
20
R/P
G/Y
R
VIDEO IN
S-VIDEO IN
RGB 1 IN
REMOTE 1
REMOTE 2 IN
IN
OUT
R/P
G/Y
R
S-VIDEO IN
VIDEO IN
RGB 1 IN
REMOTE 1
REMOTE 2 IN
IN
OUT
PC
B/P
SYNC/HD
VD
B
RGB 2 IN
IN
SERIAL
OUT
B/P
SYNC/HD
VD
B
RGB 2 IN
IN
SERIAL
OUT
PC with
DVI port
PC
DVI-D Cable (Option)
(ET-SCDV03)
DVI-D IN
LAN
DVI-D IN
LAN