Example Of Connecting With Av Products; Example Of Connecting With Pcs - Panasonic PT DW5100UL Operating Instructions Manual

Example of connecting with AV products

DVD player
VIDEO IN
Red (Connect P
Blue (Connect P
Green(Connect Y)
• When connecting with a video deck, be sure to use the one with a built-in time base corrector
Attention
(TBC) or use a TBC between the projector and the video deck.
• If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect
a TBC between the projector and the video deck.
• The EDID settings may be needed depending on the equipment connected when DVI-D signals
are input. (Refer to page 37.)

Example of connecting with PCs

Control PC
R/P
R
S-VIDEO IN
VIDEO IN
REMOTE 1
IN OUT
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
Note
page 62.
• If your PC has the resume feature (last memory), the computer may not function properly until the
resume capability is disabled.
• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD
terminals.
• The EDID settings may be needed depending on the equipment connected when DVI-D signals
are input. (Refer to page 37.)
Video deck
R/P G/Y B/P SYNC/HD VD
R B
S-VIDEO IN RGB 1 IN
REMOTE 1 REMOTE 2 IN IN SERIAL
IN OUT
)
R
)
B
Digital Hi-vision video deck
PC
PC
G/Y B/P SYNC/HD VD
B
RGB 2 IN DVI-D IN
RGB 1 IN
REMOTE 2 IN IN SERIAL OUT
Digital Hi-vision video deck
with DVI/HDMI terminal
RGB 2 IN DVI-D IN LAN
OUT
D-Sub 9-pin straight cable
PC with
DVI-D terminal
DVI-D Cable (available in the market)
R/P
LAN S-VIDEO IN
VIDEO IN
REMOTE 1
IN OUT
DVD player
DVI-D Cable or HDMI-DVI
conversion cable
(available in the market)
Control PC
G/Y B/P SYNC/HD VD
R B
RGB 2 IN
RGB 1 IN
REMOTE 2 IN IN SERIAL OUT
DVI-D IN LAN
23