Gigabyte GA-F2A88X-D3H User Manual page 57

Deleting an Array
To delete an array, enter the following commands and press <Enter>.
rcadm -D -a 1(Figure 7)
("D"=Delete a array, "a 1"=Array 1, to delete all arrays, enter "a *")
When prompted to confirm, enter YES to delete or NO to cancel, and then press <Enter>.
fs0:\>rcadm -D -a 1
Delete Array 1, are you sure?(YES, NO): yes
deleting array 1
deleting array //./Core1/Route0/Device 1
fs0:\>
To exit the UEFI RAID utility, enter "exit" and press <Enter>.
Figure 7
- 57 - Configuring SATA Hard Drive(s)