Connection; Battery Charge; Battery Strength - Panasonic KX-TGA272S Operating Instructions Manual

Installation

Connection

•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).
•The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)

Battery Charge

Place the handset on the charger
and charge for about 15 hours
before initial use.
•The CHARGE indicator lights, a beep
sounds and "Charging" will be
displayed.

Battery strength

You can check the battery strength on the handset display.
The battery strength is as shown in the chart below.
Display prompt
Note: If a fully charged battery is disconnected from the unit and plugged in again,
the LCD display will show
full strength.
8
(flashing)
" "
. Charge the battery for about 15 hours to obtain
AC Adaptor
CHARGE Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Discharged
Power Outlet
(AC 120 V, 60 Hz)