JVC GR-DVX2LTDEG Instructions Manual page 57

3
To DC
input jack
Core filter
To VIDEO output jack
1
CONNECT DOCKING STATION TO
TV OR VCR
Connect as shown in the illustration
( pg. 56, 57).
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2
CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
3 TURN ON POWER
4
SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
Downloaded from:
AC Power Adapter/Charger
To DC
output jack
DC cord
To S-VIDEO
output jack
To AUDIO input jacks (L/R)
To AUDIO
output jacks (L/R)
Red
White
Core filter
Yellow
https://www.usersmanualguide.com/
Core filter
S-VIDEO cable (provided)
To S-VIDEO input jack
VIDEO/
AUDIO cable
(provided)
(connect when the S-VIDEO cable is not used)
NOTES:
● When using the provided VIDEO/AUDIO cable
(Docking Station to TV or VCR), DC cord, S-
1 2 3
, or
VIDEO cable or editing cable, make sure you
connect the end of the cable with the core filter to
the Docking Station. The core filter improves
performance of equipment.
● If TV/VCR is equipped with only one audio
connector, use a conversion plug (commercially
available).
● Set the VIDEO OUT select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
Connection to a TV or VCR
equipped with an S-VIDEO
IN and/or A/V input (RCA
type) connectors
To
TV or VCR
Red
White
Yellow
To VIDEO
input jack
57
EN
VCR