Table of Contents
Advertisement
54
EN
VCR/TV Connection (when connecting directly to the camcorder)
1
CONNECT CAMCORDER TO TV OR
VCR
Pull out the jack cover and open it. Connect as
shown in the illustration.
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2
CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
3
TURN ON POWER
Turn the Power Dial to "PLAY" and turn on the
TV/VCR.
4
SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time, Time Code
.... set to "ON" or "OFF" in the Playback Menu
(
pg. 52).
• Playback Sound Mode Display
.... Press the MENU button, and set "ON
SCREEN" in the Date/Time Menu (
to "ON" or "OFF". Then set the Power Dial
back to "PLAY".
Downloaded from:
MIC
To AV OUT
DC-IN
Open the
jack cover.
VIDEO/AUDIO cable (provided)
(ø3.5, camcorder to TV or VCR)
Cable adapter (provided)
If your VCR has the 21 pin AV input connector (SCART),
use the provided cable adapter.
https://www.usersmanualguide.com/
PLAYBACK
VIDEO OUT select switch (set to CVBS)
To VIDEO/AUDIO IN
connectors
NOTES:
● Turn on the TV/VCR after connection is com-
pleted. Otherwise damage to this unit and other
equipment may result.
● Input mode setting varies depending on the type
of TV used. Refer to your TV's instruction manual.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● To keep the camcorder's display from appearing
on the TV screen during playback, press the
IND.ON/OFF button for longer than 1 second.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (
● Never connect any other VIDEO/AUDIO cable
than the provided VIDEO/AUDIO cable to the
camcorder's AV OUT jack.
pg. 11)
Basic Connections
To TV or VCR
VCR
pg. 10)
Advertisement
Table of Contents
