Malfunction
"E:30/-20"
All other error codes.
Device not working.
Program does not start.
Cause and Troubleshooting
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
Reduce the amount of detergent for the next wash
▶
with the same load.
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with the same load.
Additional water filled.
▶
Do not fill the appliance with additional water during
operation.
Solenoid valve defective.
Please contact customer service.
▶
→
"After-sales service", page 55
Malfunction
Please contact customer service.
▶
→
"After-sales service", page 55
Mains plug of the power cable is not plugged in.
Connect the device to the power supply.
▶
The fuse in the fuse box has blown.
Check the fuse in the meter cupboard.
▶
Power supply has failed.
Check whether the interior lighting or other devices
▶
are working.
was not pressed.
Press .
▶
Door is not closed.
▶
Close the door.
Child lock is activated.
Deactivate child lock.
▶
→
"Deactivate childproof lock", page 36
Ready inis activated.
Check ifReady inis activated.
▶
→ "Buttons", page 24
Laundry is jammed in the door.
Remove trapped laundry.
▶
TroubleshootingNL
47