Dubbing; Dubbing To A Vcr - JVC GR-DVL149EG-X Instructions Manual

38
EN
Power Switch
Connector cover*
To
S-VIDEO
S-Video cable
(optional)
"Y/C"/"CVBS"
video out
select switch
* When connecting the cables, open this cover.
** Connect when an S-Video cable is not used.
Downloaded from:
Audio/Video cable
[mini-plug to RCA
plug] (provided)
To AUDIO, VIDEO**
and -IN
connectors
Cable Adapter (provided)
If your VCR has a SCART
connector, use the provided
cable adapter.
VCR
TV
https://www.usersmanualguide.com/

Dubbing To A VCR

1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 20 and 21.
2
Set the camcorder's Power Switch to "PLAY"
while pressing down the Lock Button located on the
switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
To AV
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
4/6 on the camcorder.
5
Press 4/6 on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and
press 4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when finished.
NOTES:
● As the camcorder starts to play your footage it will
appear on your TV. This will confirm the connections
and the AUX channel for dubbing purposes.
● Before you start dubbing, make sure that the
indications do not appear on the connected TV. If they
do, they are being recorded onto the new tape.
● Set the video out select switch of the cable adapter as
required:
Y/C
CVBS : When connecting to a TV or VCR which does
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in
the Menu Screen (
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
• Playback Sound Mode, Tape Speed And Tape
Running Displays
..... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video
cable.
not accept Y/C signals and uses an audio/video
cable.
pg. 36).
pg. 36).
pg. 36).

DUBBING