10.13
Image Flip
The horizontal flip image can be selected by "Reverse X".
The vertical flip image can be selected by "Reverse Y".
GenICam Parameters
ReverseX
ReverseY
10.14
LUT Control
The output signal assigned table for input signal.
GenICam Parameters
LUT Selector
LUT Enabled
LUT Index
LUT Value
STC-MBS312POE / STC-MCS312POE
Product Specifications and User's Guide
IBoolean Type
Horizontal flip image ON / OFF selection
Selection: "False" (Horizontal flip is Off), "True" (Horizontal flip is On)
Default: "False" (Horizontal flip is Off)
IBoolean Type
Vertical flip image ON / OFF selection
Selection: "False" (Vertical flip is Off), "True" (Vertical flip is On)
Default: "False" (Vertical flip is Off)
IEnumeration Type
Control LUT selection (Luminance is only selectable)
Default: Luminance
IBoolean Type
LUT ON / OFF selection
IInteger Type
Index for LUT
Range: 0 to 4,095
IInteger Type
The output value for input value that specifies by index
Range: 0 to 4,095
4095
0
e.g. LUT usage (low brightness level enhancement)
4095
LUT Index
No.18S113-03
50/70