Listening To Messages (Base\Unit) - Panasonic KX-TG2584 Operating Instructions Manual

(fl)
7 Press (Save key).
≥A beep sounds.
≥To exit the programming mode, press
(EXIT/STOP).
≥You can exit the programming mode any time by pressing (EXIT/STOP).
Listening to Messages
(Base\Unit)
You can see the total number of recorded messages on the base unit
display. If the ANSWER ON indicator flashes, new messages have been
recorded.
To play back messages, press
(MESSAGE\PLAYBACK)
When you have new
messages:
the unit announces the number of
new messages and only new
messages are played back.
When you have no new
messages:
the unit announces "No new
messages. All message playback"
and plays back all messages.
When you have no messages:
the unit announces "No messages".
≥At the end of the last message,
"End of final message" is heard. The
unit will announce the remaining
recording time if it is less than
5 minutes.
To adjust the speaker volume:
9 levels (0–8) are available during playback.
To increase, press
For assistance, please call: 1-800-211-PANA(7262)
.
(‹)
. To decrease, press
Call monitoring
(MESSAGE\PLAYBACK)
ANSWER ON Indicator
(DIGITAL\SP-PHONE)
(›)
.
:Off
"
(‹) (›)
, ,
(fi) (fl)
,
(EXIT/STOP)
63