Table of Contents
Advertisement
Removing the Hand Belt
1. Press on the projecting part of the terminal and
disengage the metal hand belt fitting, as shown in the
illustration.
2. Peel apart the hook and loop fastener and pull the
hand belt back through the hand belt hook.
3. Use the stylus to press on the hand belt hook as you
pull it out of the strap holes/anti-slip hook/hand belt
hook mount, as shown in the illustration.
USB AC Adapter (5V2A) (AD-S50200A)
The USB AC adapter must be fitted with a suitable power plug for the region where the
terminal will be used.
Installation
1. Insert the protruding part of the AC adapter
plug into the recess in the top of the AC
adapter (
(
).
Removal
1. Push the AC adapter plug release lever in the
direction indicated by the arrow in the figure
(
) and then pull out the AC adapter plug in
the direction of the arrow (
Precautions for Use
• Do not insert the plug only into the power outlet.
40
) until the plug clicks into place
).
Advertisement
Table of Contents
