Charging The Battery Pack - Casio DT-X450 Series User Manual

Charging the Battery Pack

You can charge the battery pack while it is installed in the DT-X450 using the optional USB
AC Adapter, USB cradle, Ethernet cradle or multiple battery charger. Check charging status
LED to confirm DT-X450 charging status.
You can also use the USB cradle, Ethernet cradle or dual battery charger to charge the
battery pack.
USB AC Adapter
DT-X450 Charging status LED display
Orange:
Green:
Red:
Orange flashing: Charging (DT-X450 cannot start up because the charge remaining in the
Precautions for Use
• Take care to avoid trapping the cover between the USB Type-C cable and the USB
Type-C port.
• After attaching the cable, check that the charging status LED is lit.
• Use only the USB AC adapter and USB Type-C cable specified for use with this
product.
The use of other USB AC adapters or USB Type-C cables may result in abnormal
operation.
USB Cradle, Ethernet Cradle
22
USB Type-C Cable
HA-S81USBC
Charging
Charging complete
Standby due to battery pack error or because the ambient temperature is
outside the charging temperature range.
(Charging begins when the temperature returns to the charging temperature
range.)
battery pack is too low. Wait until the charging status LED stops flashing
and lights orange.)
AC Adapter
AD-S50400A
USB AC adapter
AD-S50200A