Number Of Rings - Panasonic KX-TG2343W Operating Instructions Manual

Select the recording time by pressing [d] or
5
[B].
• You can also select the recording time by pressing
[1], [2], [3] or [0] (Greeting only).
6 Press Save, then press [OFF].
If you select "Greeting only", the unit will answer calls with the greeting
message, and then hang up. The unit will not record any incoming messages.
The base unit will display "

Number of Rings

You can select the number of times the unit rings before the Answering System
answers a call, from "2" to "7" or "Toll saver"*. The factory preset is "4".
Press [MENU].
1
Scroll to "Initial setting" by pressing [d]
2
or [B], then press Select.
Press Select at "Set answering".
3
Press Select at "Number of rings".
4
Select the number of rings by pressing [d] or
5
[B].
• You can also select the number of rings by
pressing [0] (Toll saver*), or [2] to [7].
Press Save, then press [OFF].
6
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you
if there are any new messages. If the unit answers on the 2nd ring, there is at
least one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
For assistance, please call: 1-800-211-PANA(7262)
Preparing the Answering System
" instead of the number of messages.
Handset
Recording time
:3min
Back Save
K
dB
Initial setting
Back Select
K
dB
Set answering
Back Select
K
dB
Number of rings
Back Select
K
dB
Number of rings
:4
Back Save
K dB
L
L
L
L
L
21