Table of Contents
Advertisement
To connect the remote sensor
1
Choose the USB port (1)
2
Plug the remote sensor cable (2) into the USB port.
3
Position the remote sensor (3) to enable unobstructed communication with the remote commander.
If you are using a cable or satellite set-top box, you can attach the remote sensor control to the remote sensor, which enables
you to control the set-top box with the remote commander.
To connect the remote sensor control
1
Plug the cable from the remote sensor control (1) into either jack (1 or 2) on the back of the remote sensor (2).
Downloaded from:
https://www.usersmanualguide.com/
you prefer to use.
n
N
59
Using Your VAIO Computer
Advertisement
Table of Contents
