Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of purchase.
Installing the Battery Pack
To install the battery pack
1
Turn off the computer and close the LCD screen lid.
2
Slide the battery lock switch (1) to the UNLOCK position.
3
Slide the battery into the battery compartment until it clicks into place.
4
Slide the battery lock switch (1) to the LOCK position to secure the battery on the computer.
✍
When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
This computer is designed to operate only with genuine Sony batteries.
Downloaded from:
https://www.usersmanualguide.com/
n
N
23
Getting Started