Onkyo TX-SR393DAB Instruction Manual page 9

Table of Contents

Advertisement

1.
ON/STANDBY button
2. MUSIC OPTIMIZER button: Turns on/off the MUSIC OPTIMIZER function that
improves the quality of the compressed audio.
3. BLUETOOTH indicator: Lights up when this unit and a BLUETOOTH-enabled
device are connected.
4. DOLBY ATMOS indicator: Lights up when Dolby Atmos signals are reproduced
in appropriate listening mode.
5. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
6. ZONE A/B button: Selects an audio output destination from among "ZONE A",
"ZONE B" and "ZONE A+B". (
7. INFO button: Switches the information on the display and is used to operate
p41).
RDS (
8. DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
9. Display (
p10)
10. SETUP button: You can display advanced setting items on the TV and the
display to have a more enjoyable experience with this unit. (
11. Cursor buttons (
/
/
/ ) and ENTER button: Select an item with the
cursors, and press ENTER to confirm your selection. When using TUNER, use
them to tune in to stations. (
p37)
12. RETURN button: Returns the display to the previous state while setting.
13. MASTER VOLUME
14. PHONES jack: Connect headphones with a standard plug (ø1/4"/6.3 mm).
15. LISTENING MODE button: Switches the listening mode (
pressing "STEREO", "MOVIE/TV" and "MUSIC" repeatedly.
16. Input selector buttons: Switches the input to be played.
17. TONE CONTROL button: Adjusts the sound quality. Press
"VOCAL" or "BASS" respectively. (
18. SETUP MIC jack: Connect the supplied speaker setup microphone. (
p44)
p65)
p49) by
/
of "TREBLE",
p47)
Contents
Connections
p84)
9
Front
Playback
Panel≫ Rear Panel≫ Remote≫
Setup

Advertisement

Table of Contents
loading

Table of Contents